June 10, 2013

Announcement

Hello Coffeeholics!

Since the disastrous change at flickr many of my friends left the site and moved elsewhere, and so did I. You can see us here now:

ipernity

The new Caffenol group and my own account are shown in the linklist.

Don't look back - Reinhold

Agfa Copex Rapid 35 mm film, Caffenol-C-L

May 6, 2013

more microfilms - Copex Rapid

Microfilms are a little bit delicate to process, because the extremely thin emulsions are very contrasty as they shall be regarding the original purpose. Anyhow, for pictorial use we don't need specialized and very expensive developers as some distributors want to make you believe. Simple Rodinal 1:100 or 1:200 already gives nice results. And Caffenol-C used in an adapted manner produces state-of-the-art results.

Here we talk about the Copex Rapid from Agfa Belgium. I got it in an older package as the so called "gigabitfilm", and yes, the naming imho was a serious aberration of taste and the film was sold together with an expensive and very doubious developer. That initially brought the whole category of microfilms into discredit.But enough wining about people who only want to empty your pockets. This blog is ad-free and will stay so as long as the host will allow it. Caffenol strikes again!

Caffenol-C-L is a weak or compensating developer ideal for extended stand development or for a low contrast development in some minutes. Here I used Caffenol-C-L with no restrainer (no KBr or salt) for 13 minutes/20°C, regular agitation (30 sec initially, 3x every min) and the film was exposed at EI 50. The strong backlight is a challenge for any film/developer combo and of course you need a proper exposure.I metered the foreground, added 3 stops (for the zonies: it was set to zone 2) and still have a good tonal resolution in the sky. The Copex Rapid is told to handle a contrast range of 14 stops, try that with your full format DSLR ;-) Grain is virtually not existent or not resolvable with my humble Canoscan 8800F. The density range of this negative is D = 0.2 - 1.8, so it should be printable perfectly on silver paper.


The very thin emulsions of microfilms only need a very short fixing time, maybe less than 10 seconds, in normal strenght fixer, so you should dilute your fixer much more to get at least a fixing time of 1 minute to not overfix the negs. Make a clearing test!

Best regards - Reinhold

February 5, 2013

Kodak BW400CN

Recently I shot my first roll of Kodak BW400CN, a chromogenic b/w film. A first experiance in C41 color developer slightly pushed turned out very good at EI 1600, and I wanted to try Caffenol. I'm not a big fan of color film developed in b/w developer, but this BW400CN developed in Caffenol-C-L is as good as developed in color developer. No doubt. This film is ideal for high speed purposes and hybrid workflow. You can push this film a lot and still don't get to much contrast, for the sample image attached here I even had to enhance the contrast in pp. Grain is still very small, almost unvisible with my Canoscan 8800F. The look is very different from other films, probably ideal for taming highest contrasts. The orange mask is very transparent and the base fog very low.

So here's a sample, no masterpiece for sure, but showing the character of the film under very low light conditions at EI 1600, simple average metering with my trusty Canon A1. Developed in Caffenol-C-L semi stand with 0.5 g/l pot bromide, 20 °C, 70 minutes, fixed in regular bw fixer, increased contrast (s-curve) in Gimp.



Best - Reinhold